Review article · 2018
Research articlePublished Apr 2014
Prediction &Control of Chatter in Milling Machine Spindle-Tool Unit -A Review
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Chatter is a self-excited vibration which occurs in milling machines while operating at high speed. This is an undesirable phenomenon which has negative effects, such as poor surface finish, unacceptable accuracy, excess noise, tool wear and lower Material Removal Rate (MRR). Chatter is self-excited vibration which can occur by various phenomenon’s like Frictional chatter, thermo-mechanical chatter, Mode Coupling Chatter and very importantly regenerative chatter. Prediction and detection of chatter is very important in milling machine tool, which gives guidance to the machine tool user for an optimal selection of depth of cut and spindle speed, which results in higher material removal rate with high accuracy, with less vibrations. Chatter prediction is very complicated phenomenon in machine for its avoidance. In this paper, various methods are presented for the prediction of chatter. Analytical and experimental methods are presented in this paper for the chatter control which gives idea for the selection of optimal speed and depth of cut from the stability lobe diagram (SLD) and easiest method for chatter prediction is suggested. Stability lobe diagram is an effective tool which helps the operator to select specific spindle speeds for avoidance of chatter in machine. Stability lobes are plotted against axial depth of cut vs. spindle speed, which shows a boundary between stable and unstable regions.
Keywords
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in International Journal of Innovative Research in Science, Engineering and Technology.
Research article · 2018
Spectrum Sensing Methods for Cognitive Radio: A Survey
Review article · 2018
Utilization of Food Wastes to Prepare Film Forming Biomolecules (Retracted)
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Innovative Research in Science, Engineering and Technology
- SubjectEngineering
- BylineArticles whose byline prints “Sunilsing Rajput”
- BylineArticles whose byline prints “Dr. D.S. Deshmukh”