Scholars Central

Conference abstractPublished 2015

Binding of methacrylate-based monoliths to PEEK supports for HPLC separations

Authors: Enrique Javier Carrasco-Correa, Rocío García-Aboal, Paula Plaza-Jarque, Aida López-Serna, Guillermo Ramis-Ramos, Ernesto Francisco Simó-Alfonso, José Manuel Herrero-Martínez

University of Valencia, Spain

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Porous monolithic materials are becoming increasingly popular as stationary phases for miniaturized separation techniques. Monoliths have high permeabilities, which enables excellent performance for the fast separation of large molecules. From a chemical viewpoint, the typical monolith consists of a cross-linked polymer backbone that carries the functional groups providing the dedicated selectivity. Monoliths are mostly prepared in fused silica capillaries to be used as separation media in capillary HPLC and electrochromatography. For this purpose, silanization of the inner surface is required to assure binding of the monolith to the silica support. This avoids both ejection of the monolith under external pressure and peak tailing due to gaps located close to the support walls. However, the small inner diameters of silica capillaries (75-520 µm) prevent their use in conventional HPLC. Therefore, there is a need of developing methods to covalently bind monoliths to other supports commonly available in much larger inner diameters than silica capillaries. In this work, procedures to modify the surface of Poly Ether Ether Ketone (PEEK) tubes so that they bind with poly methacrylate-based monoliths for HPLC separations, are described and compared. For this purpose, 0.75 mm i.d. PEEK tubes were used. After selection of binding procedure, several polymerization variables (monomer/cross-linker ratio, type and content of initiator, among others) were studied in order to tailor the chromatographic performance of the resulting columns. Chromatographic tests were applied to provide information about the anchoring of the monolith to the tube wall. Also, mixtures of alkylbenzenes and organophosphorus compounds were used to characterize the chromatographic performance of the developed stationary phases.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Diagnostic Techniques and Biomedical Analysis.

All its articles

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Diagnostic Techniques and Biomedical Analysis
  • SubjectPathology & Lab Medicine
  • BylineArticles whose byline prints “Enrique Javier Carrasco-Correa”
  • BylineArticles whose byline prints “Rocío García-Aboal”
  • BylineArticles whose byline prints “Paula Plaza-Jarque”
  • BylineArticles whose byline prints “Aida López-Serna”
  • BylineArticles whose byline prints “Guillermo Ramis-Ramos”
  • BylineArticles whose byline prints “Ernesto Francisco Simó-Alfonso”
  • BylineArticles whose byline prints “José Manuel Herrero-Martínez”