Research article · 30 Jul 2023
Short communicationPublished 29 Sep 2020
Studies on the effects of nano-additive based biodiesels on low- and high-pressure injection assisted diesel engine performance, combustion and emission characteristics
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The potential of use nanoparticles like aluminium oxide, grapheme oxide, Zinc oxide, Cobalt and Manganese as fuel additives was investigated on different non-edible derived biodiesels and their blends with diesel. The biodiesels such as dairy scum oil methyl ester (DSOME), Honge oil methyl ester (HOME) and Simarouba oil methyl ester (SuOME) were selected for the study and their B20 blends were prepared using diesel respectively. The Nano-fuel blends were prepared by dispersing different nanoparticles in varying quantities in a B20 blends (20% biodiesel and 80% diesel). Sodium dodecyl sulfate (SDS), an anionic surfactant, was used for a stable dispersion of different nanoparticles in the fuel blends. Biodiesel (B20) fuels with concentration levels of 20, 40, 60 and 80 ppm of different nanoparticles (Biodiesel20, Biodiesel2040, Biodiesel2060 and Biodiesel2080) with varying ratios of SDS surfactants were prepared using ultrasonication technique. The investigated properties of diesel, biodiesel and the Nano-fuel blends were found to be in good agreement with the ASTM D6751-15 standards. The dispersion and homogeneity were established and characterized by using the Ultraviolet Visible (UVeVis) spectrometry. The UVeVis spectrometry results illustrated an increase in absorbance level with a relative increase in the concentration of the surfactant. The highest absolute value of UV-absorbency was observed for a mass fraction of 1:4 (NPs to SDS ratio). Experimental investigation was performed in a modified diesel engine operated at both low (200-260 bar) and high pressure (600-900 bar) injection of Nano-biodiesel blends at a constant speed of 1500 rpm, demonstrated an overall improvement in the engine parameters, the brake thermal efficiency (BTE) enhanced by 11.25%, while there was a decline in brake specific fuel consumption (BSFC) by 12.25% and the engine exhaust emission: HC, CO, and smoke reduced by 27.52%, 47.63%, and 23.44%, while the NOx increased by 11.15%. Higher injection pressures of 900 bar showed further improvements in the results. Among the Nano-particles used addition of graphene nanoparticles in biodiesel fuel blends resulted in significant reduction in the combustion duration, ignition delay period, improvement in the peak pressure, heat release rate, and cylinder pressure at maximum loading condition. It is concluded that a dosage of 40 to 60 ppm of Graphene NPs in Biodiesel 20 had the ideal enhancement in the overall characteristics of engine performance and emissions.
Keywords
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Natural Products Chemistry & Research.
Review article · 30 Jul 2023
Bioactivity Diversity in Coriander Sativum: A Comprehensive Review
Research article · 30 Jun 2023
Ethnobotany Of Medicinal Plants For Diabetes And Antioxidant Activity Of Selected Phyllanthus amarus Schum. and Thonn., Chrysanthellum americanum (L.) Vatke And Striga hermonthica (Delile) Benth. Of Burkina Faso
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalNatural Products Chemistry & Research
- SubjectChemistry
- BylineArticles whose byline prints “N. R. Banapurmath”