Research articlePublished 2015
Development of Sequencing Batch Reactor Performance For Nitrogen Wastewater Treatment
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The performance of a typical sequencing batch reactor (SBR) for removing various nitrogen loadings was investigated in this study. The typical cycle of SBR consisted of filling of 5 min, aerating of 3 h, non-aerating of 4 h, settling of 1 h and decanting of 5 min (HRT was approximately 24 h). The results showed that the nitrogen removal efficiency was gradually increasing from ∼ 36% at the low NH4-N of 10 mg/L to ∼ 50% at the higher NH4-N of 20 mg/L and reached to the maximal efficiency of 82% at the highest concentration of 40 mg/L. This is due to the increasing NH4-N and nitrogen removal rates which were 6.0 and 5.5 mg/L⋅h at the best reactor performance. Moreover, the high specific nitrogen removal rate of 20.5 mg N/g MLVSS.h was found and the most effective carbon consumption of 2.4 mg C/mg N was obtained during the experiment.
Keywords
Subjects
Biochemistry & BiotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Microbial & Biochemical Technology
- SubjectBiochemistry & Biotechnology
- BylineArticles whose byline prints “Le HT”
- BylineArticles whose byline prints “Jantarat N”
- BylineArticles whose byline prints “Khanitchaidecha W”
- BylineArticles whose byline prints “Ratananikom K”
- BylineArticles whose byline prints “Nakaruk A”
