Commentary · 28 Feb 2025
Short communicationPublished 2018
Use of halide solution to improve the RDI and RI of sinter : A Case Study
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The reduction-degradation index (RDI) of sinter is an important parameter to estimate the quality of sinter in low temperature zone (450-550?C) of blast furnace. Hence, it is of great importance to reduce the RDI of sinter which improve the permeability of blast furnace burden column for a stable and smooth performance resulting high yield and low consumption. In the last few years, many researchers have studied and reported the method for improving sinter quality by adding halide solution on to surface of the manufactured sintered ore. Some sinter producers also established from practices that spraying CaCl2 solution on to the sinter surface will reduce the RDI of sinter. In this paper, at Jindal Steel & Power Ltd., Raigarh, under laboratory conditions, a study was conducted on the RDI and RI (reduction index) of sinter, which was immersed with different concentrations of CaCl2 solution. The lab results showed the RDI and RI of sinter decrease with the increase of Cl- concentration. With comprehensive consideration of the RDI and RI of sinter, when the concentration of Cl- reaches a certain level (let say X%), the RDI of sinter will be significantly reduced and at the same time RI will not be affected. On the basis of the laboratory results, a pilot plant study has been done and finally the same has been erected for the existing sinter plant successfully. Key Words: RDI & RI, Sinter, CaCl2, Blast Furnace
Keywords
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Archives of Industrial Biotechnology.
Brief report · 28 Feb 2025
Advances in Enzyme Engineering for Industrial Biotechnology.
Editorial · 28 Feb 2025
CRISPR and Genome Editing in Industrial Microorganisms.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalArchives of Industrial Biotechnology
- SubjectBiochemistry & Biotechnology
- SubjectEngineering
- BylineArticles whose byline prints “Sanjay Srivastava”
