Scholars Central

Conference abstract

Development of reactive polyurethane resins for use as hotmelt in the wood industry

Authors: Claudia S V G Esteves, Ines C S Cardoso, Ana Gomes Margarida Bastos, Jorge Martins, Filomena Barreiro Joao C F Fernandes, Fernao Magalhaes, Luísa Carvalho

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

HotPUR project is promoted by Lorcol, in cooperation with Faculdade de Engenharia da Universidade do Porto, Instituto Politécnico de Viseu and Associação Rede de Competência e Polímeros, as R&D partners, and Vicaima as the final user of the product to be developed. The project’s main objective is to provide Lorcol with a new line of products: reactive polyurethane hotmelt adhesives, PU-HMR. This will allow Lorcol to fill a gap in its product portfolio. The company will be able to offer a complete range of adhesives for the wood industry. Reactive polyurethanes hot melt adhesives (PU-HMR) are prepolymers prepared from polyester and or polyether glycols and diisocyanates. The urethane linkage (-NH-COO-) in the polyurethane is a result of the reaction between the diisocyanate (-NCO) groups and polyol hydroxyl groups (-OH). They formed block copolymers composed of alternating soft and hard blocks or segment. The soft segment provides elastomeric character to the polymer while the hard segment forms dimensional stability. PU-HMR are moisture-curing polyurethane adhesives applied typically between 85°C and 140°C in the form of a melt and solidifying at room temperature. The final curing is attained at 24 to 48 hr. The initial bond strength of PU- HMR is activated by the solidification and the final strength is achieved with the reaction of free NCO with both wood and moisture. Polyurethane prepolymers were synthesized by reacting molar excess of diphenyl methane diisocyanate (MDI) with different polyols and filler. Different formulations were performed in order to evaluate the influence of the most important parameters on bonding performance and though their ability for edge banding in doors. Chemical characterization and the structure properties of the PU-HMR was also performed and the study between different polyurethane synthesis, by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis, differential scanning calorimetry and size exclusion chromatography. Amorphous and crystalline polyols and isocyanates with different molecular weights and reactivity were tested. To study the glue characteristics as the final viscosity, open time, wood bonding and thermal properties, the initial ratio NCO/OH and final NCO were changed.

Subjects

Chemistry

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Polymer Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalPolymer Sciences
  • SubjectChemistry
  • BylineArticles whose byline prints “Claudia S V G Esteves”
  • BylineArticles whose byline prints “Ines C S Cardoso”
  • BylineArticles whose byline prints “Ana Gomes Margarida Bastos”
  • BylineArticles whose byline prints “Jorge Martins”
  • BylineArticles whose byline prints “Filomena Barreiro Joao C F Fernandes”
  • BylineArticles whose byline prints “Fernao Magalhaes”
  • BylineArticles whose byline prints “Luísa Carvalho”