Scholars Central

Research articlePublished 23 Dec 2014

Corrosion Protection of Rebar steel in Marine Atmosphere by Nanocoating

Authors: Rajesh Kumar Singh, Sanjoy Misra

Research & Reviews: Journal of Material Sciences

Volume 2 · Issue 1 · Pages 5–12

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Rebar steel is an important building material which is basically used for construction works. This metal is reinforced with concrete for construction of bridges and houses. Such types of bridges and houses face corrosive problems in coastal areas because high concentration of Cl- ions marine atmosphere. There are several porosities on the surface bridges and houses. The chloride ions enter inside the building materials and develop electrochemical cell on the surface of rebar steel. Rebar steel undergoes process of corrosion reaction and creates several forms of corrosion like galvanic, pitting, stress and crevice. Chlorides ions develop internal and external corrosive effect for rebar steel and concrete hence disbanding occur between building materials. This corrosive ion decreases life of building materials, increase maintenance costs and sometimes major accident takes place. The hydroxides of magnesium and calcium are present in concrete. Chloride ion reacts with these hydroxides and decreases the pH value of concrete thus accelerate the rate of corrosion reaction. Nanocoating of Mg3(PO4)2 with DLC filler is applied to control corrosion of rebar steel in marine atmosphere. The uncoated and coated rebar steel with Mg3(PO4)2 were exposed to marine atmosphere in different seasons like summer, rainy and winter. The corrosion rate of metal was analyzed in these seasons. The results show that though corrosion rate is minimized it does not produce good results. Porosities are developed on the surface of rebar steel coated with Mg3(PO4)2 which is reactive with chlorine ion. DLC is used as filler to close the porosities of coated rebar steel and again the corrosion rate of rebar steel was analyzed in the above mentioned seasons. It is found that this filler has good inhibition effect in marine atmosphere. The corrosion of metal was determined by gravimetric and potentiostatic polarization methods. Coating work was completed with application of nozzle sprays and vapour deposition methods. Coating efficiency, surface coverage area and stability of coating material were calculated with Arrhenius, Langmuir isotherm, Temkin equation, free energy, enthalpy and entropy

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Rajesh Kumar Singh”
  • BylineArticles whose byline prints “Sanjoy Misra”