Conference abstractPublished 18 Jan 2019
High efficient fully printable organic-inorganic hybrid bulk heterojunction thin-film solar cells based on metal-alkoxides
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Photovoltaic cells, which are expected to serve as a clean and renewable energy source, are among the most abundant technologies for energy on earth besides hydropower and wind power. On the other hand, organic-inorganic hybrid thinfilm solar cells constructed using polythiophene derivatives and metal alkoxides constitute promising and novel organicinorganic hybrid devices. We have reported some organic-inorganic bulk heterojunction solar cells with several p-type semiconducting polymers and Ti-alkoxides for the photoactive layer. These solar cells involve low fabrication cost and use safe materials but their conversion efficiency is not very high. One reason for this is that the phase-separated structure is not controlled adequately for utilization in exciton generation and diffusion, charge separation and charge transportation. Therefore, we present a three-component layer as the photoactive layer using the phase-separation assistant material. Organicinorganic hybrid thin-film solar cell structure consists of indium-doped tin oxide transparent conductive film, photoactive layer (p-type semiconducting polymer/TiOx/fullerene derivative as the phase separation assistant material) and organic electrode. The current density and voltage characteristics were measured using a direct-current voltage and a current source/monitor under illumination with AM 1.5G simulated solar light at 100 mW/cm2. The phase-separated structures of the photoactive layers were investigated by scanning electron microscopy. The three-component bulk heterojunction solar cell with the p-type semiconducting polymer/TiOx/fullerene derivative structure as a photoactive layer exhibited higher current density than the conventional two-component solar cell.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Takehito Kato”