Conference abstract
Finite element material model for the prediction of the thermal conductivity of highly filled polymers
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Advanced polymer composites are increasingly used in the development of efficient and resource-conserving applications which require a high thermal conductivity. To optimize the thermal properties of the composites, fillers are added into the matrix material. To predict the effective thermal conductivity of the composites, several theoretical and empirical models have been presented. To enhance the prediction of the influence of various fillers on the effective thermal conductivity a 3D finite element based material model is presented. Thereby, different properties of the filler such as filler geometries, filler proportions, filler size distributions and filler orientations can be considered. To evaluate the model, specimens of polyphenylensulfid (PPS) with cuboid aluminum silicate (AlSi) fillers are injection-molded. The filler fraction is gradually increased up to the processing limit. The fillerdependent thermal conductivity is determined by different measuring methods and compared with the prediction from the material model. The results show that the prediction with the material model matches the measurements very well. Therefore, it is assumed that the developed material model can be used for the reliable virtual development of new highly filled thermally conductive polymer composites. Using the model first studies have been conducted to establish guidelines for the development of advanced polymer composites. Recent Publications 1. Progelhof R C, Throne J L and Ruetsch R R (1976) Methods for predicting the thermal conductivity of composite systems: a review. Polymer Engineering and Science. 16(9):615-625. 2. Hongyun Chen et al. (2016) Thermal conductivity of polymer-based composites: fundamentals and applications. Progress in Polymer Science. 59:41-85. 3. Ich Long Ngo, S V Prabhakar Vattikuti and Chan Byon (2017) A modified Hashin-Shtrikman model for predicting the thermal conductivity of polymer composites reinforced with randomly distributed hybrid fillers. International Journal of Heat and Mass Transfer. 114:727-734. 4. Hill R F and Strader J L (2007) Rudimentary finite element thermal modeling of platelet-filled polymer-ceramic composites. IEEE Transactions on Components and Packaging Technologies. 30(2):235241. 5. Ich Long Ngo, Sangwoo Jeon and Chan Byon (2016) Thermal conductivity of transparent and friable polymers containing fillers: a literature review. International Journal of Heat and Mass Transfer. 98:219-226.
Keywords
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalPolymer Sciences
- SubjectChemistry
- BylineArticles whose byline prints “Gaiser Jochen”
- BylineArticles whose byline prints “Henning Frank”
- BylineArticles whose byline prints “Stripf Matthias”