Conference abstractPublished 9 Sep 2017
High temperature sliding wear of Inconel 718 against silicon nitride and alumina
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In closed cycle gas turbine, turbine blades are subjected to severe wear because of high contact temperature and pressure. Inconel 718 is used as a blade material for closed cycle gas turbine applications; however, its friction and wear properties have been studied fully under high stress and high temperature conditions. Friction and wear behavior of Inconel 718 against silicon nitride and alumina have been studied under dry sliding conditions in temperature range of 40-500Ã?°C using ball-ondisc universal tribometer. For sliding distance test the wear rate of Inconel 718 with alumina is less than silicon nitride for the entire range at 500Ã?°C. The wear volume of Inconel 718 increases with the increase in sliding distance increases from 200 m to 1000 m against alumina and silicon nitride. For Inconel 718 highest coefficient of friction (Ã?¼) of 0.88 and 0.52 against alumina and silicon nitride was obtained at 10 N, whereas minimum Ã?¼ of 0.45 and 0.40 against alumina and silicon nitride was obtained at 20 N, these tests carried out at 500Ã?°C. For temperature test highest coefficient of friction (Ã?¼) 0.75 at 400Ã?°C and lowest Ã?¼ 0.46 at 200Ã?°C against silicon nitride whereas highest coefficient of friction (Ã?¼) 0.88 at 200Ã?°C and lowest Ã?¼ 0.54 at 500Ã?°C against alumina. Optical microscopy, SEM, EDXA, and 3-D profilometery have been used to understand the friction and wear mechanism of tribopair. From these observations it is concluded that wear of Inconel 718 is minimum.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Mohd. Farooq Wani”