Conference abstractPublished 9 Sep 2017
High temperature tribological behavior of AISI D2 against AISI 52100 and alumina
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In cold forming, die materials are subjected to severe wear because of high contact temperature and pressure. D2 steel is used as die material for cold forming applications. However, its friction and wear properties have not been studied fully under high stress and high temperature conditions. Friction and wear behavior of D2 steel against AISI 52100 and Alumina have been studied under dry sliding conditions in temperature range of RT âÂ?Â? 150Ã?°C, using ball-on-disc universal tribometer. For sliding distance test the wear rate of D2 with AISI 52100 is less than the Alumina for entire range at 150Ã?°C. The wear volume of D2 steel increases with the increase in sliding distance from 200 m to 1000 m against AISI 52100 and Alumina. For D2 steel, highest coefficient of friction (Ã?¼) 0.751 and 0.754 against AISI 52100 and Alumina was obtained at 5 N, whereas minimum Ã?¼ of 0.32 and 0.43 against AISI 52100 and Alumina was obtained at 25 N, these tests were carried out at 150Ã?°C. For temperature test, highest coefficient of friction (Ã?¼) of 0.92 and 0.7671 against AISI 52100 and Alumina was obtained at 50Ã?°C, whereas minimum Ã?¼ of 0.77 and 0.52 against AISI 52100 and Alumina was obtained at RT. Optical microscopy, SEM, EDXA and 3D profilometery have been used to understand the friction and wear mechanism of tribopair. From these observations it is concluded that wear of D2 steel is minimum for particular range of load and temperature. The results obtained are useful for designers and engineers working in the field of cold forming.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Mohd Farooq Wani”