Research article · 16 Mar 2026
Conference abstractPublished 9 Sep 2017
Suspension thermal sprayed nanocomposite WC-Co coatings: Nano-indentation assessment
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Statement of the Problem: Nanoindentation of WC-12Co thermal spray coatings has been used to evaluate the elastic modulus and hardness of coating on the polished surface of the coatings. While there has been much progress overall, limited research has been reported on the deposition and evaluation of WC-cermet coatings. The aim of this study was to evaluate the microstructural and nanohardness characteristics of tungsten carbide-cobalt (WC-Co) cermet coatings deposited by liquid suspension spraying. Methodology: Commercially available WC-Co coating powder was milled and water based suspension was produced as feedstock for the thermal spray coating process. Microstructural evaluations of WC-Co cermet coatings included XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscopy). Post spraying nanomechanical evaluations were conducted using a Berkovich nanoindenter. Findings: Results indicated relatively higher modulus but lower hardness of suspension coatings. The load displacement curves during nanoindentation were characteristic of the complex coating microstructure showing signs of microcracking and pileup. The load displacement (P-h) curves along with the SEM images of indents for S-HVOF (suspension high velocity oxyfuel) coating illustrated evidence of sink-in and pile-up of material around the indent contact residual impression during the nanoindentation process. There was some indication of microcracking during indentation as well. Conclusions: A comparison of S-HVOF and conventional HVOF coatings points toward phase transformations occurring in the suspension spraying which led to nanocrystalline or amorphous phases. The elastic modulus of S-HVOF coatings was on average higher than the conventional HVOF coating. The load displacement curves show features which are consistent with the complex coating microstructure with evidence of micro-cracking and pile-up.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Research & Reviews: Journal of Material Sciences.
Editorial · 31 Dec 2025
Time of Arrival (ToA): Principles Techniques and Applications in Modern Systems
Editorial · 31 Dec 2025
Carbon-Based Nanoparticles: Structure Properties and Advanced Applications
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch & Reviews: Journal of Material Sciences
- SubjectMaterials Science
- BylineArticles whose byline prints “Matheus (Theo) F A Goosen”
- BylineArticles whose byline prints “Omar Ali”
- BylineArticles whose byline prints “Rehan Ahmed”
- BylineArticles whose byline prints “Nadimul H Faisal”
- BylineArticles whose byline prints “Nayef M Al-Anazi”
- BylineArticles whose byline prints “Youssef O Elakwah”