Conference abstractPublished 13 Jun 2016
Development of new Spark Plasma Sintered (SPS) composite materials reinforced with single crystal alumina fibers (NKR®)
Neoker S L, Spain
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
High performance advanced composites are mainly used in structural applications, where the main concerns are mechanical performance (stiffness, strength, creep and fatigue resistance), although many other properties can dominate the selection procedure (electrical conductivity, thermal conductivity, dielectric properties, etc.). The most suitable variant has to be chosen on the basis of this application-driven “wish list”. Of course, the final properties of a composite will always be determined both by their composition (the matrix and the reinforcing phase) and by their fabrication procedure. When a novel material is employed as a reinforcing phase, conventional fabrication routes will often offer limited possibilities and limited performance, and therefore disruptive sintering strategies are needed to achieve the best potential from such a new composite. The novel single crystal alumina fibers, produced by Neoker, possess a huge potential to be used as a reinforcing phase in high performance composite materials. As an oxide, alumina can offer chemical stability where non-oxides (carbon, carbides, nitrides etc.) are likely to fail. As single crystals, they are defect-free, and as fibers, NKR® big aspect ratio (length/diameter) allows a big increase in the mechanical performance of the composite compared to the bulk material. Here we are presenting our preliminary results, where we have demonstrated that Spark Plasma Sintering is able to overcome the main difficulties of incorporating NKR® fibers in composites, so it can be considered one of the most promising sintering routes for this new family of materials. In this work, different matrix compositions have been combined with different NKR® fiber percentages using SPS route. The use of different coatings has been explored, trying to improve the matrix-fiber interface, thus activating fiber strengthening. Most relevant features of the final composite have been analyzed, focused on density, porosity and mechanical performance (bending strength, toughness etc.). In this work, we have been able to demonstrate that NKR® fibers combined with the SPS route gave rise to composite materials with high densities and homogeneous microstructures, allowing good control of interface properties, and therefore achieving high mechanical performances. This combination of NKR® fibers and SPS route will bring unique opportunities to create new high added value composite materials.
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectMaterials Science
- BylineArticles whose byline prints “Víctor Valcárcel”