Scholars Central

Conference abstractPublished 27 Dec 2017

Improve microstructure and mechanical properties of Cf/SiC-Cf/SiC joint by TiCoNb+Nb foil

Authors: Qiang Zhang, Jie Zhang

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Ti35Co35Nb30 eutectic filler alloy was used to braze Cf/SiC composite. The results showed that there were many large TiCo intermetallic compounds in the brazing seam and the shear strength of the joint was only 34.4 MPa. To improve the microstructure and mechanical properties of the joint, Nb foil was introduced into the filler alloy. Nb can melt into the liquid solder to adjust liquid solder composition during brazing process. The effect of holding time on the microstructure and mechanical properties of brazed joints was investigated. With extending the holding time, the Nb foil thinning and disappeared gradually, TiCo and Nb (s,s) eutectic and CoNb4Si compound increased and massive TiCo intermetallic compounds disappeared. The highest shear strength with 66 MPa was received while the joint brazed at 1300 Ã?Â?Ã?°C for 15 min.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Research & Reviews: Journal of Material Sciences.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalResearch & Reviews: Journal of Material Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Qiang Zhang”
  • BylineArticles whose byline prints “Jie Zhang”