Research articlePublished 26 Dec 2016
Influence of Silicon Carbide Particle Addition in the Aluminium (Al6061) Composite on EDM Process Parameters
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In this study, a new approach of investigation has been traced, by subsequently mixing the Al6061 (base material) with SiC particulate. The percentage (by Volume) chosen was 5%, 10% and 15% SiC, respectively. The casted specimen with appropriate proportion was analyzed by cutting the specimen as per the prescribed standard. Through the electric discharge machining the holes (10 mm diameter and 2 mm depth) were produced on the specimens by varying the different flushing rates 0.5, 0.6, 0.7, 0.8, 0.9 and 1 kg/cm2, respectively. To validate the process of mixing ratio of SiC particulate on the based material Al6061, the surface roughness (SR) and Material removal rate (MRR) values were investigated through L27 orthogonal array.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Chemical Sciences
- SubjectChemistry
- BylineArticles whose byline prints “S. Bharani Kumar”
- BylineArticles whose byline prints “S. Arul”