Editorial · 27 May 2025
Research articlePublished 31 Mar 2013
Studies on Solvent Selection in Extraction of Oil from Waste Mud
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The most important adsorbent used in bleaching fats and oils is bleaching earth mixed with activated char coal. After every adsorption cycle, considerable amount of oils and fats were wasted by adsorption. In this study, we suggested an extraction process to recover oil wastes from adsorbent. Three different solvents namely, hexane, benzene and toluene were used for the experimental studies. The effective solvent was selected based on the removal efficiencies of the solvents. The influences of temperature and solvent to feed ratio were studied. The results showed that for any solvent studied, the removal efficiency increased with increase in solvent to feed ratio. Also, for any solvent at any solvent feed ratio studied, the removal efficiency increased with increase in temperature. From the results obtained hexane is considered as effective solvent for the extraction of oil from the waste mud.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in International Journal of Chemical Sciences.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInternational Journal of Chemical Sciences
- SubjectChemistry
- BylineArticles whose byline prints “S. Velmurugan”
- BylineArticles whose byline prints “A. Babuponnusami”
- BylineArticles whose byline prints “K. P. Gopinath”
- BylineArticles whose byline prints “B. S. M. Kumar”