Scholars Central

Conference abstractPublished 2 Oct 2017

Synthesized natural gas production by dually fluidized bed gasification of woody biomass and subsequent methanation

Authors: Koji Hashimoto

Tohoku Institute of Technology, Japan

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The current atmospheric carbon dioxide concentration on our planet exceeded 400 ppm, which corresponds to the atmosphere in Pliocene 3.5 million years ago. Our planet had to spend 2.5 million years to decrease it to the pre-industrial level of about 280 ppm mostly by solid carbonate formation as a result of weathering dissolution of rocks on elevated Himalayan Tibet mountain massif due to the heavy rain of the monsoon. It is, therefore, impossible for us to decrease carbon dioxide from 400 ppm to 280 ppm. Only the effort we can do is to decrease carbon dioxide emissions. Our effort of the use of woody biomass in the form of synthesized natural gas is one of the solutions. We formed synthesized natural gas by efficient gasification of woody biomass and subsequent methanation. For gasification of whole-wood pellets including bark, we carried out dual fluidization in both combustion furnace and gasification furnace. In this system we performed gasification by thermal decomposition and steam gasification avoiding nitrogen contamination and achieved more than 75% cold gas efficiency of the calorific value of the wood, obtaining high concentration of hydrogen. We used a novel tar reformer with a catalyst and attained 99.9% tar reformation in the pilot scale experiment, without deterioration for 8000 h in the laboratory scale experiment. After gasification, we sent a mixture of hydrogen, carbon monoxide, carbon dioxide and steam to the methanation reactor, which uses Ni-ZrO2 type oxide catalysts. The reactor converts a mixture of 4 volumes of hydrogen and one volume of carbon dioxide to methane with almost 100% methane selectivity and about 90% conversion efficiency at 300 °C and ambient pressure. In fact, carbon monoxide at first reacted with steam shifting to hydrogen and carbon dioxide (CO+H2O=H2+CO2). Thus, the amount of methane formed was a quarter of the sum of hydrogen and carbon monoxide in the reactant gas (4H2+CO2=CH4+2H2O). We performed a demonstration at 38 Nm3/h of reactant gas with 40% steam to form methane with more than 70% calorific efficiency. The process simulation showed that the methane purity is higher than 99% after membrane separation.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectPetroleum & Mining
  • BylineArticles whose byline prints “Koji Hashimoto”