Scholars Central

Short communicationPublished 11 Dec 2021

Toughness and dielectric behavior of Polycristalline alumina

Authors: L. Haddour

Materials Science: An Indian Journal

Volume 19 · Issue 8 · Pages 1

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Different alumina materials were elaborated in order to vary micro structural parameters (grains size, densification, porosity, intergranular phase). These ceramic materials were then characterized from the mechanical point of view (hardness, toughness, friction and wear) and dielectric breakdown. The comparison of these various results shows that for all these properties, the grain size and, thus also, nature of the secondary phases are the most discriminating microstructural parameters. Moreover from the tribological point of view, the dielectric characteristic of materials (breakdown strength) has a fundamental role on the creation of the third body and the properties of this last: a finely agglomerated third body will be obtained for high breakdown strength. Such third will be able to protect the substrate and thus to reduce later wear. In samelogic a correspondence between breakdown strength and toughness was established, thus confirming the mechanics-electric correlation existing for the non-conductive materials.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Materials Science: An Indian Journal.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalMaterials Science: An Indian Journal
  • SubjectMaterials Science
  • BylineArticles whose byline prints “L. Haddour”