Research articlePublished 2009
Effect of different filler materials on the abrasive wear behavior of glass fiber reinforced polymer matrix composites
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The incorporation of silicon carbide (SiC), Alumina (Al2O3) and pine bark dust (PBD) fillers on three-body abrasive wear behaviour of random glass fiber-epoxy resin (RGF-Epoxy) composites has been investigated. Dry sand/ rubber wheel abrasion tests were carried out at 200rpmtest speed. The tests were carried out at 50N and 75Nloads by varying the abrading distance from 200 to 600m. Themass loss and specific wear rate of the composites reduces significantly on the addition of SiC filler. The predominantwearmechanisms in the case ofAl2O3 composite were plastic deformation, micro-cutting, pitting in the matrix, and fibre removal. In the case of SiC composite the wear mechanisms weremicro-cutting, ploughing, fragmentation ofwear debris in thematrix and excessive deterioration of fibre surface followed by delamination, while in pine bark dusts the wearmechanisms weremicro-cutting in the resin matrix and tearing the fibre transversely at their ends.
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalMaterials Science: An Indian Journal
- SubjectMaterials Science
- BylineArticles whose byline prints “Amar Patnaik”
- BylineArticles whose byline prints “Alok Satapathy”
- BylineArticles whose byline prints “Sandhyarani Biswas”
