Conference abstractPublished 12 Apr 2021
Low Air Permeability Flexible Polyurethane Foam with Recycled Polyol Obtained Using Ester-Type Foam Waste Gylcolysed in Autoclave
Politehnica University of Timișoara, Romania
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Ester polyurethane foam waste was reacted in autoclave, with diethylene glycol at different ratios in the presence of catalyst, to find the glycolysis conditions allowing improved recovery of the polyurethane foam waste and enable recycling of the whole glycolysis product in foam formulation suitable to produce low air permeability foam. The recycled polyol was characterized by dynamic viscosity, hydroxyl number, water content and density, while thermal stability was assessed using thermogravimetric analysis. 5% of the glycolyzed material was successfully reused in polyurethane foam formulation. It has been observed that this amount of recycled polyol enables the generation of low air permeability foam without shrinkage, whereas standard polyols used in that application cannot afford feature. Low air permeability foams can be used in applications as sealed foams. The results open the way of further optimization studies of industrial polyurethane foam formulations using a glycolysis process to recover the foam waste.
Subjects
Environmental & Earth SciencesAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEnvironmental & Earth Sciences
- BylineArticles whose byline prints “Gabriel Kiss”