Conference abstractPublished 9 Nov 2017
Behavior of axially loaded back-to-back cold-formed steel built-up channel sections
Curtin University Sarawak, Malaysia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Back-to-back built-up cold-formed steel channel columns are being increasingly used by cold form steel structures, such as trusses, wall frames and portal frames. In such an arrangement, independent buckling of channel-sections can be prevented by using intermediate fasteners, at discrete points along the length. Current guidelines in the North American Standard (NAS) for such back-to-back built-up cold-formed steel channel sections requires the use of a modified slenderness approach in order to take into account the spacing of the screws. This method, however, is well-known to be conservative. This paper presents the results of 60 tests performed on back-to-back built-up cold-formed steel channel sections. Test results are then compared against the design strengths calculated in accordance with AISI and the Australian and New Zealand standard. It is shown that the AISI and the Australian and New Zealand Standards are un-conservative for columns sections failed by local buckling whereas standard under estimate the strength of intermediate and long columns which were failed mainly by overall member buckling for the both the section BU 75 and BU 90 considered in the investigations.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- BylineArticles whose byline prints “Hieng Ho Lau”