Conference abstract · 17 Dec 2025
Conference abstractPublished 25 Aug 2015
Gasification of biomass wastes under different operating conditions: Producer gas quality and biomass interchangeability
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Forestry (pinus pinaster pruning), agricultural (grapevine tree pruning) and industry (dealcoholized marc of grape) wastes can be considered as the main biomass sources for energy from the inland regions of Spain, the first being a typical waste from forest maintenance and timber harvesting and the others being typical wastes from unirrigated agriculture and distillery industry, respectively. Pruning of pine is made every five years (on average) with a production of around 5 tonnes per hectare, and pruning of grave pine is made yearly with a production of 0.83 tons per hectare. The production of marc of grape is around 0.14 kg/kg grape (on average). European and Spanish energy policies are encouraging the use of biomass for energy purposes, with three targets: economic and social development of the countryside, elimination of wastes and reduction of CO2 emissions. However, such policies have not been successful yet in Spain owing to uncertainties in the guarantee of provision of raw material, to fluctuations of the raw material prize and to administrative difficulties, leading to the discouragement of investors. In this frame, biomass gasification constitutes an attractive option, and an alternative to the combustion of biomass. The producer gas from gasification can be directly used in internal combustion engines for mechanical or electrical energy production. One of the main advantages of gasification is the possibility to install small, low-cost and efficient gasifierengine couples, which allows the biomass to be used close to source, and thus, the elimination of much of the storage and transportation costs. Additionally, the combination of short-run forestry and agricultural wastes for supplying power plants provides higher operation flexibility and minimizes the effect of seasonal supply variations. However, the gasifier design must be optimised as a function of the physical and thermo chemical parameters of the biomass, while the engine design must be optimised as a function of the producer gas composition. As a consequence, only where these compositions are substantially similar, the original biomass wastes can be used in a flexible supply system. The producer gas compositions obtained from the gasification of the above mentioned wastes in a circulating flow gasifier have been compared in order to determine whether these wastes can be used in combination or interchangeably in gasification systems. Experimental tests were carried out not only considering different fuels but also several operating conditions (equivalence biomass/air ratio, gasification temperature and type of gasifying agent (air, air/steam mixtures).
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Fundamentals of Renewable Energy and Applications.
Conference abstract · 17 Dec 2025
Multi-energy infrastructure for production and storage of green hydrogen
Conference abstract · 17 Dec 2025
Deforestation: the last battle against human existence
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Fundamentals of Renewable Energy and Applications
- SubjectEnergy & Power
- BylineArticles whose byline prints “Juan J Hernández”
