Article · 19 Feb 2026
Review articlePublished 24 Jun 2021
State of the Art and Recent Advances in Electrical Conductive Coatings by Sol-Gel Process
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
With the development of smart materials and the requirement of multifunctional systems, coatings were developed with the aim to improve and optimize many properties and especially in the electrical field (resistivity, conductivity, permittivity,..) Relative to the electrical conductivity, the need is growing in many activity areas with the recent tendencies (green technology and energy). Recently, the sol-gel route to process coatings was investigated for its ability to develop innovative multifunctional coatings. Because the sol-gel matrix is known to be completely insulating, the conductivity can be brought by the development of a composite material, with the incorporation of conductive fillers into the insulating network. The aim of this paper is to present an overview of the sol-gel coatings, dedicated to the electrical conduction, started in the 2000’s. A rapid introduction will set the context including many “standard” applications of sol-gel coatings. Then, studies are gathered according to the fillers incorporated in the sol-gel formulation (Tables 1-3). Each coating is described in detailed. Correlations and tendencies are identified and discussed. The lowest surface electrical resistance is obtained using metallic fillers (145 mΩâ?¡), but the carbon fillers are very promising taking benefit of their various form factors. After an exhaustive presentation of the state of the art in this field, some new quantitative examples of coatings recently developed are presented. Various systems and architectures are detailed with associated applications. The major results show a surface electrical resistance comparable to the best values listed in the literature (around 130 mΩâ?¡), but with carbon fillers against metallic fillers. Furthermore, the combination of carbon fillers and the capability to develop a sol-gel multi-layer is demonstrated. Finally, a key point is relative to the application of these conductive sol-gel coatings on a complex shape substrate.
Keywords
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Clement Genet”
- BylineArticles whose byline prints “Hiba Azougaghe”
- BylineArticles whose byline prints “Marie Gressier”
- BylineArticles whose byline prints “Florence Ansart”
- BylineArticles whose byline prints “Olivier Gavard”
- BylineArticles whose byline prints “Marie-Joelle Menu”
