Scholars Central

Conference abstractPublished 4 Jun 2018

Effect of sintering conditions on microstructural, mechanical and electrochemical properties of injection molded co-based powder for bio-applications

Authors: Olcay Özcan

Marmara University, Turkey

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Co-based alloys (Co-212) have been used in biomedical application for implant materials because of promising as a potential material for biomedical applications. This paper describes the effect of sintering conditions on microstructural, mechanical, and electrochemical properties of injection molded for Co-based superalloy. Co-212 powders were injection molded with wax-based binder. The critical powder loading for injection molding was 60 vol.%. Binder debinding was performed in solvent and thermal method under high purity argon atmosphere. After debinding, the samples were sintered at different temperatures and times in vacuum. The densities of the sintered components were determined in accordance with the Archimedes' principle. A correlation between sintering temperature and time which bring about high densification and good corrosion resistance was obtained. Results of study showed that injection molded Co-based alloys exhibited high mechanical and corrosion properties in a physiological environment. Maximum density and hardness were obtained for maximum sintering temperatures and times.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectChemistry
  • SubjectEngineering
  • BylineArticles whose byline prints “Olcay Özcan”