Scholars Central

Conference abstractPublished 6 Nov 2017

Electrochemical Synthesis of ZnTe and Cu-ZnTe thin films for low resistive ohmic back contact for CdS/CdTe solar cells.

Authors: Shivaji M Sonawane

Savitribai Phule Pune University, India

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

CdTe thin film photovoltaic solar cells are amongst the promising technology for large scale solar electricity production. ZnTe are intensively studied as an interface layer for CdTe absorber in CdS/CdTe thin film photovoltaic devices. ZnTe is direct band gap; P-type semiconductor with high absorption coefficient of the order of 104 cm-1 is suitable for solar cell development. It can be used as a low resistive ohmic contact to CdS/CdTe or tandem solar cell application. ZnTe and Cu-ZnTe thin film have been electrochemically synthesized on to fluorine-doped tin oxide coated glass substrates using three electrode systems containing Ag/AgCl, graphite and FTO as reference, counter and working electrode respectively was used to deposit the thin films. The aqueous electrolytic solution consist of 0.5M TeO2, 0.2M ZnSO4, and 0.1M Na3C6H5O7:2H2O, 0.1MC6H8O7:H2O and 0.1mMCuSO4 with PH 2.5 at room temperature was used. The reaction mechanism is studied in the cyclic voltammetry to identify the deposition potentials of ZnTe and Cu-ZnTe.The potential was optimized in the range -0.9 to -1.1 V vs. Ag/AgCl reference electrode. The effect of depositon potential on the structural properties was studied by using X-ray diffraction. The X-ray diffraction result reveled cubic crystal structure of ZnTe with preferential (111) orientation with cubic structure. The surface morphology and film composition were analyzed by means of Scanning Electron Microscopy (SEM) and Energy Dispersive Analysis of X- Rays (EDAX). The optical absorption measurement has been analyzed for the band gap determination of deposited layers about 2.26 eV by UV-Visible spectroscopy. The drastic change in resistivity has been observed due to incorporation of copper probably due to the diffusion of Cu in to grain boundaries.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectChemistry
  • SubjectEnergy & Power
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Shivaji M Sonawane”