Scholars Central

Conference abstractPublished 10 Sep 2019

Reactive plasma processes for formation of high-mobility IGZO thin film transistors

Authors: Yuichi Setsuhara

Osaka University, Japan

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Reactive plasma process systems have been developed via installation of inductively-coupled plasmas (ICP) sustained with low-inductance antenna (LIA) for low-temperature fabrication of flexible electronics, which require large area and low damage processes with reactivity control capabilities at low substrate temperature. Major advantage of the reactive processing system is that the reactivity during film-deposition processes can be enhanced and controlled via low-damage and high-density plasma production for low-temperature processing of devices. The reactive plasma processes have been applied to sputtering deposition of transparent amorphous oxide semiconductor a-InGaZnOx (a-IGZO), which has attracted great attentions as key material for next-generation flexible electronics. So far post annealing at elevated temperature (as high as 400°C) was required. Thus the conventional process for fabrication of the IGZO TFTs has been carried out on glass substrates. With the advanced reactivity controlled plasma processes in this study, a-IGZO thin-film transistors (TFTs) with mobility as high as or higher than 40 cm2/Vs was successfully formed at substrate temperature less than 200°C. In this presentation, the reactive plasma processes are presented for low-temperature formation of IGZO TFTs. Recent Publications 1. K Takenaka, M Endo, G Uchida and Y Setsuhara (2018) Fabrication of high-performance InGaZnOx thin film transistors based on control of oxidation using a low-temperature plasma. Applied Physics Letters 112:152103. 2. K Takenaka, Y Setsuhara, J G Han, G Uchida and A Ebe (2018) Plasma-enhanced reactive linear sputtering source for formation of silicon-based thin films. Review of Scientific Instruments 89(8):083902. 3. Kosuke Takenaka, Yoshikatsu Satake, Giichiro Uchida and Yuichi Setsuhara (2017) Low-temperature formation of C-axis orientated aluminum nitride thin films with plasma-assisted reactive pulsed-DC magnetron sputtering. Japanese Journal of Applied Physics 57: 01AD06. 4. Kosuke Takenaka, Keitaro Nakata, Giichiro Uchida, Yuichi Setsuhara and Akinori Ebe (2016) Effects of working pressure on the physical properties of a-InGaZnOx films formed using inductively-coupled plasma-enhanced reactive sputtering deposition. IEEE Transactions on Plasma Science 44:3099. 5. K Takenaka, K Nakata, H Otani, S Osaki, G Uchida and Y Setsuhara (2016) Process controllability of inductively coupled plasma-enhanced reactive sputter deposition for the fabrication of amorphous in GaZnOx channel thin-film transistors. Japanese Journal of Applied Physics 55:01AA18

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalInnovative Energy & Research
  • SubjectEnergy & Power
  • BylineArticles whose byline prints “Yuichi Setsuhara”