Conference abstractPublished 29 Aug 2018
Combinedoxidation of methane to synthesis gas
Al-Farabi Kazakh National University, KazakhstanThe Institute of Combustion Problems, Kazakhstan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Biogas is a promising source of hydrocarbons capable of providing the current and future needs of mankind for energy and hydrocarbon feedstocks [1]. The main components of biogas obtained in anaerobic bioreactors are methane and carbon dioxide, as impurities can contain carbon monoxide and oxygen [2]. Biogas obtained in this way can be converted to synthesis gas by dry (CH4 + CO2) or steam reforming (CH4 + H2O) using appropriate catalysts [3-5]. In the present work, a modified nickel catalyst supported on alumina was used as catalysts for the combined oxidation of methane. Experiments on testing the efficiency of catalysts were carried out on an automated flow catalytic unit (PKU-1). The reaction products were identified chromatographically on a device of "CHROMOS GC-1000" . The figure shows the results of the effect of promoting additions of lanthanum (La2O3), molybdenum (MoO3) and cerium (CeO2) oxides on the catalytic activity of the nickel catalyst in the combined methane oxidation reaction involving oxygen, carbon dioxide and water vapor, under process conditions: CH4: CO2 : O2: H2O = 2: 2: 1: 0.5, Tr = 850° C and W = 1000 h-1. As can be seen from the figure, the promotion of nickel catalyst with cerium, lanthanum or molybdenum oxides results in an increase in the activity and selectivity of nickel catalyst. The highest activity and selectivity of the nickel catalyst is observed when oxides of cerium and molybdenum are promoted. On the promoted 3% NiO-1% MoO3 / Al2O3 catalyst, the selectivity for hydrogen was 66%, for carbon monoxide 47%. At the same time, the concentration of H2 reaches 52 vol. %, CO up to 33.9 vol. % and methane conversion 95%. For a catalyst of 3% NiO-1% CeO2/Al2O3, the selectivity for hydrogen is 50% and for carbon monoxide 60%. In this case, the concentration of H2 obtained reaches 41 vol.%, CO up to 42.8 vol.% and methane conversion 98%. Thus, the activity and selectivity of oxidesupported nickel-containing catalysts promoted by MoO3, CeO2 and La2O3 oxides during methane reforming into synthesis gas was tested. It is determined that the promotion of nickel catalyst with cerium or molybdenum oxides leads to an increase in the selectivity and activity of the catalysts for the desired products.
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalInnovative Energy & Research
- SubjectEnergy & Power
- BylineArticles whose byline prints “Dossumov K”
- BylineArticles whose byline prints “Yergaziyeva G”
- BylineArticles whose byline prints “Myltykbayeva L”
- BylineArticles whose byline prints “Telbayeva M”