Research articlePublished 8 Jan 2017
Strain in Vanadium Thin Film due Nanosecond Laser Treatment
Abstract
A thin coating of vanadium was grown on a glass substrate using vacuum coating technique. Piezoelectric thickness monitor was used to measure the thickness of the deposited coatings in-situ. The vanadium layer was then treated with a nanosecond pulsed fiber laser source in ambient conditions, and this resulted in the surface cracking due to heat dissipation from the laser. The density of cracks was observed to increase in a direct proportion to the laser fluence. The increase in the density of the cracks was accompanied by the surface modification of the of the vanadium layer as observed in the high-resolution scanning electron microscope. At higher laser fluence there are pinholes forming on the surface of the laser, and this is due to the laser punching and taking place at those experimental conditions.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Nanomaterials & Molecular Nanotechnology
- SubjectNanotechnology
- SubjectGenetics & Molecular Biology
- BylineArticles whose byline prints “Kotsedi L”
- BylineArticles whose byline prints “Kaviyarasu K”
- BylineArticles whose byline prints “Fuku XG”
- BylineArticles whose byline prints “Sone BT”
- BylineArticles whose byline prints “Maaza M”
