Scholars Central

Conference abstractPublished 22 May 2017

A green polyester and products from carbon dioxide, water and solar power

Authors: Jian Yu

University of Hawaii at Manoa, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Statement of the Problem: Carbon dioxide (CO2) is a prime green-house gas emission from industrial processes. It can be converted into bio-oil and bio-diesel through conventional photosynthesis of microalgae. The CO2 fixation rate, however, is quite low and affected by the intermittent solar irradiation. Methodology & Theoretical Orientation: An artificial photosynthetic bioprocess is developed to produce green polyester from CO2, water and solar power. In this green process, solar energy is captured using photovoltaic modules and converted into hydrogen as a stable energy source via water electrolysis. The solar hydrogen and oxygen is used to fi x CO2 by a hydrogenoxidizing bacterium. Findings: Under the autotrophic growth conditions, CO2 was reduced to biomass at 0.8 g L-1 hr-1, about 10 times faster than that of the typical bio-oil-producing microalgae (Neochloris Oleoabundans) under indoor conditions. A large portion of the reduced carbon is stored in polyhydroxybutyrate (PHB), accounting for 50-60% of dry cell mass. PHB is a biodegradable thermoplastic that can find various environmentally friendly applications. The green polyester can also be converted into small chemicals (C3-C4) with different functional groups. Specifically, PHB is degraded and deoxygenated on a solid phosphoric acid catalyst, generating a hydrocarbon oil (C6-C18) from which a gasoline-grade fuel (77 wt% oil) and a biodiesel-grade fuel (23 wt% oil) are obtained via distillation. Aromatics and alkenes are the major compounds, depending on the reaction conditions. Their reaction mechanisms from crotonic acid, a major PHB degradation intermediate, are revealed and presented. Conclusion & Significance: Biodegradable plastics and high-grade liquid fuels can be directly produced from carbon dioxide, water and solar power. The productivity of the green polyester (5.3 g L-1 d-1) is much higher than that of microalgal oil (0.13 g L-1 d-1). Other technical merits of the new green process may include continuous operation under intermittent solar irradiation and convenient scale up in outdoor.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectEnergy & Power
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “Jian Yu”