Scholars Central

Review articlePublished 31 Jan 2023

Evaluation of the Macroscopic Formability of Metallic Accoutrements Using a Cylinder Contraction Test

Authors: John Roughe

Engineering Research Institute, School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju, Korea

Journal of Powder Metallurgy & Mining

Volume 12 · Issue 1 · Pages 1–2

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Several inflow features revealed by hot cylinder contraction tests are macroscopically anatomized and compared.Accoutrements including AISI 1025( 100 – 500°C), AISI 52100( 900 – 1200°C), AA6082 (20 – 300°C and 350 – 550°C), Ti- 6Al- 4V (500 – 800°C) and AZ61A (250 – 400°C) were grouped in terms of formability. The shapes of cylinder- compressed samples were anatomized and related to formability. The addition of the maximum compass increase near themid-plane and the averaged minimum compass increase at the two instance- tool interfaces, i.e., the “cylinder contraction evaluation factor” (CCEF), serves as an indicator of formability [1]. To quantify the effect of temperature on formability, several criteria were used, including the CCEF and temperature softening formability indicator (TSFI). It has been shown that the CCEF and TSFI've mileage for assessing the formability of tested accoutrements and that temperature softening greatly affects the formability of metallic accoutrements [2].

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Powder Metallurgy & Mining
  • SubjectMaterials Science
  • BylineArticles whose byline prints “John Roughe”