Conference abstractPublished 29 Aug 2020
Fabrication of nanoporous silicon pillar array/CdS thin filmheterojunction photoanode, for photoelectrochemical water splitting
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Hydrogen is one of the best eco-friendly and high energy capacity alternatives to harmful fossil fuels. Today, we need a method that, contrary to usual methods, is also pure and clean in the step of hydrogen production! Photoelectrochemical water splitting is a one-step and renewable method of producing hydrogen without producing greenhouse gases; In fact, this method means the decomposition of water by sunlight. For photoelectrochemical water splitting, we use photoelectrochemical cell and photoelectrodes.Silicon nanoporous pillar array is a relatively new composite system of silicon. To prepare it, as a substrate and morphology controller, we use the hydrothermal etching single crystal Si wafer in a solution of iron(III) nitrate nonahydrate and HF, by an autoclave. Finally, the array of these pillars is formed almost uniformly over the entire surface of the substrate and we will see the color change of the substrate surface from silver-gray to dark black.In theory, an n-type CdS, with an about 2.4eV bandgap, and a suitable conduction edge position, can be an efficient photoanode. To deposit CdS thin films on this substrate, we will use the Chemical Bath Deposition method, and a magnetic stirrer and an aqueous solution of Cadmium Acetate asthe cadmium source, the Thiourea as the sulfur source, and Ammonium Acetate buffer as a complexing agent. So, we will expose the substrate to the solution so that either Cd ions and Sions are absorbed one by one on the substrate surface and converted to CdS on there, or colloidal CdS particles are formed in the solution and then adsorbed to the substrate. However, a shiny yellow CdS layer will form on the substrate. So, After the film deposition, we will remove the sample from the solution, rinsed with ammonia aqueous solution, and cleaned with ultrasonic deionized water.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Materials Engineering and Applications
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Mohsen Bayat”
