Research articlePublished 30 Apr 2015
Preparation and performance of different acid-doped polyaniline
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Polyaniline(PANI) doped with hydrochloride (HCl), dodecylbenzene sulfonic acid (DBSA) or amino sulfonic acid (NH2SO3H) were prepared by in-situ polymerization. Effects of acid content, reaction time, oxidant ammonium persulfate(APS) dosage and reaction temperature on conductivity of PANI were studied. The presser resistance and thermal stability of them were compared. Results show that the conductivity of HCl-PANI was the largest 198 s.m-1 under the C(HCl) 0.5 mol.L-1 ,reaction time 6.0 h, n(APS):n(aniline)=1.0 among them; The conductivity of NH2SO3H-PANI was 26 s.m-1 under the C(NH2SO3H) 1.0 mol.L-1 ,reaction time 6.0 h, n(APS):n(aniline)=2.0; The conductivity of DBSA-PANI was 98 s.m-1 under the C(DBSA) 1.0 mol.L-1 ,reaction time 8.0 h, n(APS):n(aniline)=2.0. The presser resistance of HCl-PANI was the least 10Ω, and that of NH2SO3H-PANI was the largest 120Ω. The order of their thermal stability is DBSA-PANI > NH2SO3H-PANI > HCl-PANI before 350℃, and the order is HCl-PANI > NH2SO3H-PANI > DBSA -PANI after 350℃.
Subjects
Pharmaceutical SciencesChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical and Pharmaceutical Research
- SubjectPharmaceutical Sciences
- SubjectChemistry
- BylineArticles whose byline prints “Xiao Hua Wang”
- BylineArticles whose byline prints “Chuan Qiang Li”
- BylineArticles whose byline prints “Qi Tang”
- BylineArticles whose byline prints “Yuan Hua Mu”