Research articlePublished 30 Apr 2015
Sol-gel preparation of porous In-TiO2 photocatalyst using cetyltrimethylammonium bromide as template
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A sol-gel method was used to prepare indium doped TiO2 porous photocatalyst using cetyltrimethylammonium bromide as the template. The materials were studied by XRD, SEM, and N2 adsorption-desorption methods. Photocatalytic activity of the materials was evaluated using methyl orange as the pollutant. Photocatalytic degradation efficiency is 91.8% on the sample In-TiO2(0.12) after 60 min of irradiation. The degradation efficiency is nearly 35% larger than the sample without CTAB. The sample calcinated at 500 ℃ has both the maximum adsorption capacity and photocatalytic activity. The diffraction peaks of In-TiO2 and In-TiO2(0.12) are in accordance to the diffraction peaks of anatase phase TiO2. The addition of CTAB leads to the increment of lattice parameters and cell volume. N2 adsorption amount on In-TiO2(0.12) is obviously larger than that on In-TiO2. The average pore sizes of In-TiO2 and In-TiO2(0.12) are 23.3 nm and 16.3 nm, and the total pore volumes are 0.072 cm3/g and 0.22 cm3/g, respectively.
Subjects
Pharmaceutical SciencesChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical and Pharmaceutical Research
- SubjectPharmaceutical Sciences
- SubjectChemistry
- BylineArticles whose byline prints “Wenjie Zhang”
- BylineArticles whose byline prints “Xiaobei Pei”
- BylineArticles whose byline prints “Jinlei Chen”