Conference abstractPublished 2019
MgO and Mg(OH)2/Poly ethylene glycol composites as a shape-stabilized phase change material for thermal energy storage
King Fahd University of Petroleum & Minerals (KFUPM), Saudi Arabia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Attention on phase change materials (PCMs) has increased significantly as a medium for solar energy storing. These materials are capable of absorbing and releasing huge quantities of latent heat during phase transformation. Organic Poly Ethylene Glycol (PEG) based PCM has gained growing attention because of their no supercooling and phase transfer properties. It is categorized as a good PCM due to its high chemical stability, high latent heat and eventually due to its suitable melting point. However, PEG also shows unavoidable drawbacks: the leaking during the phase transition process and it displays a low thermal conductivity. In this study, MgO and Mg(OH)2 with porous structure were prepared using different types of precipitating agents, including NaOH, KOH, NH3 with paomic acid (PA) and NH3CO3 by hydrothermal method. Among the used precipitating agents, only NaOH provided single phase MgO powder, after calcination of the precipitate for 2h at 400oC. The NH3 with PA system increased the thermal stability of the as- synthesized materials. Depending on the properties of surface tension and capillary forces, the organic PEG can be mixed/bound inside the inorganic MgO or Mg(OH)2 support. This approach allows PCMs to store and release heat in the melting/ solidifying process without any leakage of the molten material. The high heat energy storage properties and good thermal stability of the organic (PEG)–inorganic (MgO or Mg(OH)2) composite suggest the potential widespread applications. Particularly, Mg(OH)2-PEG mixed PCM composite had almost no supercooling and also showed a high value of thermal storage efficiency than that of MgO-PEG composite PCM. The compatibility of the composite PCMs with the preserving material was studied by characterizing the surface properties. The Al and Sn sheet samples in contact with the PCM are largely corrosion-free, indicating that composite PCMs is compatible with Al or Sn surfaces under high-intensity solar radiation or humid condition.
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Nuclear Energy Science & Power Generation Technology
- SubjectEnergy & Power
- BylineArticles whose byline prints “Md Hasan Zahir”
