Short communication · 1 Dec 2025
Research articlePublished 31 Dec 2013
Full Three-dimensional Finite Element Analysis of the Stress Redistribution in Mine Structural Pillar
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The assessment of the magnitudes and directions of the in situ and mining induced stresses is a vital part of an underground excavation design. In this study, the finite element method is used to develop and establish a full three-dimensional numerical model using Abaqus/Standard (Dassault Systèmes) software to evaluate the stress redistribution and the ground stability in main production level of an underground hard rock mine located in Northern Canada. The in-situ stresses are calculated based on the unit weight of the overburden rock. The ratio of the average horizontal stress to vertical stress is assumed to be 1.5. This value is selected based on the average stress ratios obtained from the neighboring mines. The behavior of the rock is assumed to be elasto-plastic. To verify and calibrate the numerical model, the obtained displacements values are compared with the values obtained from the ground movement monitors installed in this area. Based on the results of the numerical model, it was concluded that benching of the floor in the 7340E access drift by an additional 2m would increase the zones of failure in the studied pillar. Moreover, the zones of failure in the adjacent tunnels which were inside of the zone of influence of the 7340E access drift would be increased dramatically.
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Powder Metallurgy & Mining.
Short communication · 1 Dec 2025
Advanced ODS Alloys: Processing, Performance, and Applications
Short communication · 1 Dec 2025
Powder Compaction: Material, Process, And Application Insights
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Powder Metallurgy & Mining
- SubjectMaterials Science
- BylineArticles whose byline prints “M.Sepehri”
- BylineArticles whose byline prints “D.B. Apel”
- BylineArticles whose byline prints “J. Szymanski”