Scholars Central

Conference abstractPublished 2018

Investigation on the thermal and power performance of vacuum BIPV glazing and its optimization potential in high-rise buildings

Authors: Xi Chen, Hongxing Yang

The Hong Kong Polytechnic University, Hong Kong

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Due to the significant cost reduction of solar photovoltaic (PV) modules and aggravating environmental problems in the urban environment, more and more solar PV curtain walls, especially in commercial buildings, have been developed throughout the world. However, the poor thermal and sound insulation performances were usually observed in traditional solar PV curtain walls, which in turn seriously hinder their large-scale use. Although solar photovoltaic (PV) curtain walls can generate electrical power in situ, they also increase the cooling load and heating load of buildings significantly due to their high solar heat gain coefficient (SHGC) and U-Value. However, vacuum glazing, which has excellent thermal and sound insulation performance, can effectively solve the above issues for PV curtain walls. In this study, a novel high-efficient energy-saving vacuum BIPV (building integrated photovoltaic) curtain wall, which combines photovoltaic curtain wall and vacuum glazing technologies, was developed and investigated. This vacuum BIPV curtain wall can not only generate electricity in situ, but also significantly reduce the heat transfer through the building envelope due to its improved thermal insulation performance. The thermal and power performance of the vacuum PV glazing were investigated by experiments and numerical simulations. A prototype of the vacuum BIPV curtain wall was set up for a short-term outdoor testing campaign to demonstrate its thermal and power performance under typical weather conditions of Hong Kong. A comprehensive energy model was then developed to predict the dynamic power and thermal performance of the vacuum BIPV curtain wall to evaluate its annual energy saving potential compared to other advanced window technologies used in buildings in Hong Kong. Based on the simulation model, an optimum design of the vacuum BIPV curtain wall was proposed. In addition, the annual energysaving potential for a typical high-rise commercial building with the application of miscellaneous BIPV products was estimated using the typical meteorological year weather data. BIPV characteristics were jointly optimized with other architectural parameters and the net building energy demand can be decreased by up to 60% compared with a benchmark office building in Hong Kong. The target of nearzero energy high-rise building can therefore be further approached by this integrated design optimization process. Finally, a design guideline of the advanced BIPV technology was proposed to guide its future large-scale application and commercialization.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Nuclear Energy Science & Power Generation Technology
  • SubjectEnergy & Power
  • BylineArticles whose byline prints “Xi Chen”
  • BylineArticles whose byline prints “Hongxing Yang”