Perspective · 12 Aug 2025
Conference abstractPublished 5 Dec 2018
Electrowinning process for copper removal from spent etching solution in printed circuit boards manufacturing
Mahasarakham University, Thailand
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
This research aimed to study electrowinning technique to remove copper from spent copper etching solution in printed circuit boards (PCBs) manufacturing. The high acidic spent etchant (pH 0.3) from real PCBs industry containing 15,210 mgL-1 of total Cu concentration which >95% is dissolved form with an initial conductivity of 515.2mScm-1. Studied conditions involved using Cu sheet as a cathode in the comparison between three different anodes which were Al, Zn, and Fe. Current densities of 14, 28 and 56Am-2 were applied to assess the operating period. Obtained metal sludge samples have been dried and ground, thereafter, crystalline components analyzed by XRD and copper content in dried sludge were evaluated. Initial etchant pH of 0.3, 3 and 5 was tested with Cu and Al electrodes under 28Am-2 current density. Results showed that Al anode gave the highest copper removal efficiency due to its high standard reduction potential. Cementation and electrowinning were believed to be the major mechanisms for copper removal. Dissolved copper removal efficiencies after 60min of 28Am-2 current density applying using Al, Zn and Fe anodes were 99.9, 87.4, and 89.2%, respectively. For the Cu and Al electrodes case, dissolved Cu concentrations were reduced spontaneously 50-63% since the first minute of current supplied for every applied current density. Cu fractions in obtained reddish-brown sludge were 66-70% (w/w) which metallic copper (Cu), copper (I) oxide (Cu2O) and copper (II) sulfate (CuSO4â??5H2O) were mainly detected. Initial etchant pH adjustment from 0.3 to 3 and 5, leading to the poor settleable sludge forming. Dissolved Cu has been reduced by metal complexation and precipitation rather than by electrowinning method. This also results in the lower Cu proportions in the produced dried sludge of 36 and 47% for the initial adjusted pH of 3 and 5, when comparing to 67% for original pH of 0.3.
Subjects
Environmental & Earth SciencesAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Pollution Effects & Control.
Perspective · 12 Aug 2025
Neurological Disorders Caused by Air and Noise Pollution: Effects and Controls
Perspective · 12 Aug 2025
Soundscape Sustainability: Balancing Noise Pollution in Modern Society
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Pollution Effects & Control
- SubjectEnvironmental & Earth Sciences
- BylineArticles whose byline prints “Pakpong Sriprasert”
- BylineArticles whose byline prints “Nanthanat Sriprasert”
