Scholars Central

Conference abstractPublished 19 Apr 2018

Corrosion behaviour of Magnesium/Glass microballoon syntactic foams targeting engineering and biomedical applications

Authors: Manoj Gupta

National University of Singapore, Singapore

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Metal matrix syntactic foams (MMSFs) are a special class of composites in which hollow particles are dispersed through the metal matrix. The presence of hollow reinforcements imparts properties to the composite similar to that would be found in monolithic cellular materials. Such lightweight syntactic foams possessing superior properties are of continuing interest in automotive, aerospace and marine sectors to reduce weight while simultaneously increasing fuel economy required for ever-increasing stricter environmental regulations and stringent service conditions. In this context, magnesium-based materials are emerging strongly primarily due to their low density, combination of better specific strength (σ/ρ), damping characteristics and impact resistance. These properties can still be enhanced by a further reduction in density through the development of magnesium-based syntactic foams. Further, magnesium (Mg) being biocompatible offers huge potential for use as bioresorbable materials for degradable bone replacement implants due to its favorable corrosion and mechanical properties. However, high corrosion kinetics and localized corrosion progress limit wide scale implementation of magnesium based materials in marine environments and clinical implantable devices. This dire requirement necessitated the need for an investigation on corrosion behavior of hollow glass micro-balloon (GMB) reinforced magnesium syntactic foams. As environment of a human body is very aggressive to metallic products, the positive corrosion test results under simulated conditions of a human body provide a good indicator of the corrosion resistance of the material for other applications. This research presents a comparative study of the corrosion of Mg/GMB syntactic foams in Hank’s solution and in 3.5% NaCl solution for a maximum duration of 28 days. The developed syntactic foams were found to reveal promising corrosion behavior along with ~28% reduction in density as compared to pure Mg. The observed increase in corrosion resistance is correlated with intrinsic microstructural changes arising as a consequence of the presence of the hollow GMB particles.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Manoj Gupta”