Scholars Central

Conference abstractPublished 3 Dec 2018

Pumps working as turbines as an engineering solution for energy recovering in water distribution systems

Authors: Petra Amparo López Jiménez

Universitat Politècnica de València, Spain

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

At present, the society has become aware of the need to increase the energy efficiency of all the processes in which it is involved. Therefore, the use of renewable energy sources such as photovoltaic, wind, tidal, hydraulics among others is necessary in order to increase sustainability. Water distribution systems should not be oblivious to this trend, especially if one takes into account that these nets are large consumers of energy. In this sense, hydraulic is a renewable source of energy with a promising future, furthermore there is a very important recovery energy potential in our water distribution networks. This energy is partially lost on valves, which main goal of these systems is the control of the network, but pressure is reduced without recovering the inherent energy of this additional pressure in the system. Therefore, it is of paramount importance to adjust the pressure in irrigation or potable water distribution systems for consumption, but considering the possibility of recovering this energy by implementing some engineered system to do so. If these pressure reducing valves are replaced by pumps working as turbines (PATs) not only can pressure regulation be achieved, but also some kilowatts can be recovered, that otherwise would not be obtained. The operation of pumps as turbines requires considerations in the design of the machines. What in pump conditions is an inlet in turbine conditions is an outlet, and vice versa. This makes important changes in the velocity triangles occurring in the impeller, and therefore the total behavior of the machines achieve different performance. Nowadays, the determination of real curves is crucial, considering hydraulic losses inside the machines and different rotation speed for the current researches. The knowledge of these curves will help to develop real models, which determine the final efficiency of different PATs.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectEnergy & Power
  • SubjectEngineering
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “Petra Amparo López Jiménez”