Conference abstract
Effect of epoxidized cardanol on poly(vinyl chloride) as a secondary plasticizer
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
An epoxidized cardanol plasticizer derived from cardanol was synthesized and characterized by Fourier transform infrared (FTIR), 1H-nuclear magnetic resonance (1H-NMR) and 13C-nuclear magnetic resonance (13C-NMR). Effects of the epoxidized cardanol used as a secondary plasticizer for DOP in PVC blends were studied. Dynamic mechanical analysis (DMA), tensile test and thermogravimetric analysis (TGA) of PVC films plasticized with different content of epoxidized cardanol were investigated. The results indicated that the percent elongation increases with increasing epoxidized cardanol content. The epoxidized cardanol had better thermal stability than cardanol, the 10% weight loss (T10) and 50% weight loss (T50) of which enhanced from 218.73 and 259.53°C to 248.50°C and 312.53°C. And the plasticized films showed the thermal stability increased with increasing the content of epoxidized cardanol. When 8 phr DOP was replaced with epoxidized cardanol, the T10 and T50 increased by 9.58°C and 5.53°C respectively. The properties of volatility and extraction resistance of plasticizers were tested and showed similar or higher stability in those properties than that of DOP. Surface characterization of films by FTIR was also investigated.
Keywords
Subjects
ChemistryEngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Advanced Chemical Engineering
- SubjectChemistry
- SubjectEngineering
- BylineArticles whose byline prints “Jie Chen”
- BylineArticles whose byline prints “Ke Li”
