Scholars Central

Conference abstract

A novel relative permeability modifier polymer

Authors: Chao Yang, Reinaldo Navarrete, Mahmoud Asadi, Steven Fleenor

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

A new relative permeability modifier (RPM) has been developed for sandstone formations that are capable of reducing the permeability to water without impairing the permeability to oil. The new polymer has the capacity to anchor to the formation, allowing it to endure production fluid flow. Laboratory data were obtained in core flow test using high permeability sandstone cores (1.5 to 2 Darcies air permeability Berea Sandstone) at 200o F. The core flow sequence followed was to measure the relative permeabilities of oil at irreducible water (2% KCl) saturation and to water (2% KCl) at irreducible oil saturation before the injection of the RPM polymer. Then, the RPM polymer solution was injected into the core in the opposite direction (injection direction). The system was shut-in for one hour to facilitate polymer anchoring and re-organization. The relative water saturation was then determined by injecting 2% KCl in the production direction, followed by the oil relative permeability. One last water permeability was measured with 2% KCl after the oil permeability to determine the ability of the polymer to anchor to the core. Results indicate that the polymer can remarkably reduce the permeability to water without significantly impairing the permeability to oil. The regain relative water permeability was less than 20% after the injection of RPM polymer; the subsequent regain relative oil permeability was more than 75% and the regain relative water permeability was less than 30% after the oil injection. Results also indicated the RPM polymer had similar performance regardless of the injection direction used. Moreover pre-flushing the core with mutual solvent and surfactants before the polymer treatment did not have a significant effect on the performance of polymer. The capacity to selectively modify the water permeability makes it feasible to use this RPM polymer as near wellbore or far field treatment to reduce the excessive water production. Moreover, the polymer can be applied without the use of a mutual solvent and surfactants.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Advanced Chemical Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Advanced Chemical Engineering
  • SubjectChemistry
  • SubjectEngineering
  • BylineArticles whose byline prints “Chao Yang”
  • BylineArticles whose byline prints “Reinaldo Navarrete”
  • BylineArticles whose byline prints “Mahmoud Asadi”
  • BylineArticles whose byline prints “Steven Fleenor”