Conference abstractPublished 26 Nov 2018
Technique of selective and tunable wavelength conversion employing quasi-phase matched lithium niobate devices with dual pump configuration
Tokyo University of Science, Japan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
All-optical and tunable wavelength converters (WCs) can off er many attractive functions such as optical channel routing, optical add-drop multiplexing, optical label processing and dynamic light-path establishment for constructing transparent and scalable wavelength-division multiplexed (WDM) networks or future optical packet switched systems. Th e potential of such WCs has already been revealed in a number of system experiments. To date, a selective and tunable WC (STWC) has been realized by employing the cascaded second-order nonlinear eff ect of sum frequency mixing (SFM) and diff erence frequency mixing (DFM) in a quasi-phase-matched (QPM) lithium niobate (LN) device. In this technique, a signal light and two pump lights 1 and 2, which have angular frequencies ωs, ωp1 and ωp2, respectively are launched on the device with a QPM frequency of ωQPM; to satisfy the QPM condition, ωp1 is set to 2ωQPM–ωs; SFM between the signal light and the pump light 1 then produces a sum-frequency component at 2ωQPM; a wavelength-converted output fi nally appears at 2ωQPM–ωp2 through DFM between the 2ωQPM component and the pump light 2. Generally, the wavelength conversion effi ciency of the QPM-LN devices or the output power of the wavelength-converted signal light increases dramatically as the length of the LN crystal becomes longer. In such a dual-pumped wavelength conversion scheme, however, the available signal bandwidth is strictly limited by the QPM bandwidth of the device. In other words, the crystal length of the QPM-LN device has to be optimally determined so that the QPM bandwidth corresponds to or is slightly broader than the bandwidth of the original signals to be wavelength-converted. In this paper, we review a technique of the QPM-LN-based STWC from an arbitrary wavelength to another arbitrary one. Through wavelength conversion experiments using short optical pulses for the QPM-LN devices having diff erent crystal length, we investigate the bandwidth limitation in the dual pump confi guration. We show that the minimum pulse width to be wavelength-converted without waveform distortion is proportional to the length of the LN crystal, and also reveal that that ratio is 1.6ps/cm. By utilizing this critical value as a performance metric, we demonstrate highly effi cient selective and tunable wavelength conversion of 40-Gbit/s data signals using a QPM-LN waveguide device with an optimum crystal length of 5cm.This device is quite attractive for channel-by-channel wavelength conversion in 40-Gbit/s dense WDM (DWDM) systems thanks to many excellent features such as wide range of wavelength tunability, high conversion effi ciency, modulation format free, adequate signal bandwidth and selectivity of 100-GHz-spaced DWDM channels.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- BylineArticles whose byline prints “Yutaka Fukuchi”