Scholars Central

Conference abstractPublished 21 Sep 2018

An impedance biosensor for rapid detection of low concentration of escherichiacoli O157:H7

Authors: Mahmoud Almasri

Professor, University of Missouri, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

This talk will provide a brief introduction of biosensor development followed by the research in our group related to the design, fabrication and testing of an impedance based biosensor for rapid detection of Escherichia coli O157:H7with low concentration. The performance of the devices was excellent as evidenced by the focusing capability, high sensitivity and rapid turnaround time of 2 hours. The biosensor has the following innovative features: (1) a focusing region to generate p-DEP force to concentrate the bacteria into the center of the micro channel and direct them towards the sensing micro channel which has a diameter smaller than one-third of the first channel while the bulk fluid exits from the outer channel. (2) A region for cell trapping that surrounds the detection electrode and uses vertical electrode pairs to generate negative-DEP forces pushing the cells toward the region of low E-field gradient on top of the detection electrodes. Thus, they trap and facilitate the contact and binding of antigens with the E. coli antibody. (3) Bacteria sensing region consists of interdigitated electrode arrays (IDEA) with varying number of fingers coated with anti-E.coli antibody. As E.coli reaches the sensing region it binds to the antibody on IDEA surface, and results in impedance change. Fabrication of the biosensor was performed on a glass substrate using SU8 negative photoresist to form the microchannel, gold electroplating to form the vertical focusing electrode pair, thin gold film to form the detection electrode, the finger electrodes, traces and bonding pads and PDMS to seal the device. Various low concentration E.coli samples were tested without the trapping electrodes to determine the sensitivity of the biosensor and the lowest detection limit of the biosensor was found to be 39 CFU/ml in total turnaround time of 2 hours. We will also report the pathogens detecting while using both the focusing and trapping regions.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • BylineArticles whose byline prints “Mahmoud Almasri”