Conference abstract
Cellulose based hollow fiber carbon membranes for CO2 removal from high pressure natural gas in subsea process
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Natural gas (NG) is becoming one of the most attractive growing fuels for world primary energy consumption due to its availability, versatility and because it is a cleaner energy source compared to coal and crude oil. However, raw natural gas in reservoirs or wells usually contains considerable amount of light and heavy hydrocarbons (HHCs), as well as the impurities of water, H2S, CO2, N2 and helium. Natural gas sweetening is needed to remove acid gases of H2S and CO2 to meet the legal requirements and natural gas network grid specifications. Developing novel environmentally friendly and energy efficient technology for CO2 removal from natural gas is essential to improve the competition of natural gas processing plants. Although chemical absorption is still the state-of-the-art technology in this area, membrane technology has many advantages such as small footprint, low capital and operating costs, being environmentally friendly, and exhibiting process flexibility shows great potential. The challenges on natural gas sweetening membranes in the market today are the membrane compaction and plasticization, which points to the need of development on novel membrane materials for high pressure application in subsea process. Carbon membranes showed great potentials for CO2/CH4 selectivity. But the challenges on high production cost, brittleness of carbon fiber, low gas permeance due to the symmetric structure should be addressed by developing innovative low cost high performance asymmetric carbon membranes. Thus, in this work, we aim at developing mechanical strong, high performance asymmetric hollow fiber carbon membranes that can exceed CO2/CH4 Robeson upper bound (CO2 permeance >0.3 m3(STP)/ (m2.h.bar) and CO2/CH4 selectivity >100) from cheap cellulose materials for natural gas sweetening. In order to achieve this objective: 1) Suitable ionic liquids with appropriate physicochemical property was designed by molecular dynamic simulation, and synthesized for dissolution of cellulose at room temperature (<50°C); 2) Asymmetric cellulose hollow fibers with desired structure and morphology will be spun from cellulose/ionic liquids dope solution by controlling liquid-liquid demixing mechanism based on equilibrium thermodynamics of ternary phase diagram; 3) Asymmetric, defect-free and straight hollow fiber carbon membranes will be prepared by controlling carbonization protocol, and employing post-oxidation and post-reduction; the prepared carbon membrane performance for high pressure CO2/CH4 separation will be tested and reported. PDF HTML
Keywords
Subjects
Materials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Membrane Science & Technology
- SubjectMaterials Science
- BylineArticles whose byline prints “Xuezhong He”
