Perspective · 22 Jan 2024
Conference abstractPublished 2018
Residual stress reduction in Si3N4/SiO2 notch filters by reactive pulsed magnetron sputtering
Feng Chia University, Taiwan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A notch filter is typically used in engineering applications that require effective reflection or rejection of electromagnetic wave within a specified spectral region while providing high transmission at wavelengths outside of the region being rejected. Notch filters made with discrete thin film multilayers can achieve high rejection within the reflection band, high transmission outside the reflection band, and provide excellent environmental durability properties. The residual stress in thin ï¬Âlm multilayers is a critical factor for the optical coatings. The residual stress may affect the performance and reliability of the optical thin film components. The aim of this work is to produce notch filters with low residual stresses that satisfy certain spectral rejection band requirements. In this study, the residual stress behavior in two kinds of Si3N4/SiO2 dielectric quarter-wave stacks prepared by a reactive pulsed magnetron sputtering technique was presented. The numerical simulation of multilayer stress behavior by using the MATLAB software was performed. Figure1 shows 44 layers of the (Si3N4/ SiO2)22 multilayer films, the residual stress in compressive state is -91.27 MPa for the simulation and -11.38 MPa for the stress measurement. A 45-layer of alternating quarter-wave stacks of Si3N4 and SiO2, and composed of a MgF2 buffer layer. The residual stress is -74.66 MPa for the simulation and -8.43 MPa for the measurement. The discrepancy of simulation and measurement value is mainly due to ignore the interface stress between the film layers. The results show the designed (Si3N4/SiO2)22 quarter-wave stack with a buffer layer of MgF2 thin film can significantly reduce residual stress. We also found that the residual stresses in two Si3N4/SiO2 multilayer design cases are changed from compressive to tensile stress with increasing the elapsed time. The proposed approach described here for reducing residual stresses in notch filters could be applied to make low-stress multilayer coatings.
Subjects
Physics & AstronomyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Research Journal of Optics and Photonics.
Commentary · 22 Dec 2023
Nanophotonics: Shaping the Future of Optical Technologies
Commentary · 22 Dec 2023
From Photons to Electrons: The Evolution of Optoelectronics
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch Journal of Optics and Photonics
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Chuen-Lin Tien”
- BylineArticles whose byline prints “Hong-Yi Lin”
- BylineArticles whose byline prints “Chien-Jen Tang”