Article · 19 Feb 2026
Conference abstractPublished 14 Sep 2015
Hot forging of high-aluminum content magnesium alloys by using a servo press
Tokyo Denki University, Japan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
This paper deals with an innovative hot-forging process of high-tensile-strength magnesium alloy material that contains relatively high aluminum content. By applying a servo press machine, a novel hot-forging process was performed with development of highstrength magnesium alloys. Firstly, friction properties and isothermal deformation resistance during hot forming (350oC and 400oC) of Mg-Al-Ca-Mn series magnesium alloy (AXM4303 alloy) were investigated by ring-compression tests. In ring-compression tests, friction coefficients between dies and magnesium alloys are obtained using graphite, PTFE, and an oil lubricant. A novel lubricant that could prevent sticking between dies and materials was developed by hot-forging experiments. Secondly, high-tensile-strength magnesium alloys containing 9 to 12% aluminum, such as AZ91, AZ101, AZ111, and AZ121 have been made by twin-roll casting. A new experiment was performed for hot-forging of high-strength magnesium alloys with high aluminum content. From the results, it was understood that using magnesium alloys with high aluminum content yielded less compressive deformation resistance than AXM403. It was also demonstrated that hot-forging of magnesium alloys with high aluminum content produces small magnesium crystals (about 6 micrometers) and crystallized substances. The effects of the dynamic recrystallization on the microstructures of the products formed at two different temperatures (300oC and 350oC) seem to differ. Forging at 350oC improved mechanical properties and yielded the best formability.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Hisaki Watari”
