Scholars Central

Conference abstractPublished 14 Sep 2015

Atmospheric corrosion monitoring and modeling of a low alloy steel under an electrolyte film in cyclic wet–dry condition

Authors: Junhua Dong, Ch Thee, Wei Ke

Institute of Metal Research, China

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Electrochemical Impedance Spectroscopy (EIS) and film thickness measurements have been employed to study the atmospheric corrosion monitoring of steel under an electrolyte film containing Cl- and SO3 2- in wetâÂ?Â?dry cycles simulating a coastal-industrial atmosphere. The results indicate that within each cycle, the solution resistance during drying process first decreases dominated by an increase in Cl- and SO3 2- concentrations and then increases dominated by the decrease in cross sectional area of the electrolyte film, the critical thickness for the minimum resistance is around 65 Ã?¼m. The corrosion rate (Rp-1) keeps increase to a maximum around the thickness of 30 Ã?¼m and then decreases until thinning out of the electrolyte. The increase in corrosion rate can be ascribed to an enhancement of oxygen diffusion with the thickness reducing, while the decrease is considered to be caused by the quick increase of the solution resistance. As corrosion process proceeds, the corrosion rate increases greatly and reaches a maximum. During subsequent corrosion stage, the corrosion rate decreases greatly and keeps at a low value due to the formation of a stable rust layer. For each wet-dry cycle, the mean corrosion rate is calculated by the mean values theorem of integrals. Moreover, the corrosion weight loss with increasing wet-dry cycles is calculated with the same theorem, Stern âÂ?Â? Geary Equation and Faraday law. The modelling result based on EIS monitoring shows a good agreement with the simulated wet-dry corrosion test result.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Junhua Dong”
  • BylineArticles whose byline prints “Ch Thee”
  • BylineArticles whose byline prints “Wei Ke”