Scholars Central

Conference abstractPublished 14 Sep 2015

Failure of an Inconel 718 die used in production of hot copper direct extrusion

Authors: M Schwartz, D Gheorghe, R Ciocoiu, I Ciuca, G Jula

1Politehnica University Bucharest, Romania 2S.C. Laromet S.A., Romania

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Steel dies used in copper hot extrusion failed after several extrusion 2-5 tons - during the process of extrusion the die is subjected to high temperatures and stresses and the die failed mainly by plastic deformation. Industry considers new die materials, such as Inconel 718. In this research it was shown that during production using an Inconel 718 die one can extrude 8 times more material (approx. 40 tons). After the extrusion of 40 tons of copper small cracks and plastic deformation on die aperture are seen. The die was discarded and used to investigate die failure mechanisms. By using different investigation methods (optic and scanning electron microscopy, hardness and microhardness tests) microstructure changes were observed.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “M Schwartz”
  • BylineArticles whose byline prints “D Gheorghe”
  • BylineArticles whose byline prints “R Ciocoiu”
  • BylineArticles whose byline prints “I Ciuca”
  • BylineArticles whose byline prints “G Jula”