Conference abstractPublished 17 Aug 2015
Development of light weight thermal protection system (TPS) for high heat flux regions of atmospheric reentry space vehicles
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A carbon based structure namely reinforced carbon composite (RCC) coated with oxidation-resistant SiC coating, remains the first choice for the high heat-flux regions of thermal protection system (TPS) namely nose-cone and other leading edges of an Atmospheric Reentry Space Vehicle. However, RCC has two areas which call for further improvement: (i) its density of about 2000 kg/m3 imposes penalty for space application, and (ii) its good thermal conductivity makes it a poor heat insulator material for TPS application. A porous carbon foam addresses to both these issues. While, the porous structure ensures very low levels of density, it also imparts excellent thermal insulation characteristics. At the same time struts or ligaments of the foam, by virtue of being made of carbon, impart very good thermal shock resistance to the foams. Carbon foams were processed to yield varying density in the range of 0.110 to 0.232 g/cc. Foams were carbonized at 1000ºC and 1900ºC. TPS behavior of the carbon foam was evaluated in terms of its thermo structural integrity and its response to the designed heat flux profile. Thermal response was first computed for 10, 20 and 30 mm thick SiC coated C-foam TPS panels of different density and thermal conductivity using Fourier heat conduction expression. Back-wall temperature of the TPS panels of equal thickness but of different density, varied within a narrow temperature range. However, TPS panels made of 1900ºC carbonized foam which showed appreciably (36%) more thermal conductivity as compared to 1000ºC carbonized foam, recorded noticeably higher back-wall temperature. Computed thermal response was subsequently validated using the Kinetic Heat Simulation test on the processed foams. Foam panels sandwiched by SiC coated carbon based face sheets on both the sides are under processing to evolve a tiled structure for TPS applications.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “S C Sharma”
