Article · 19 Feb 2026
Conference abstractPublished 6 Oct 2014
Study the effect of microstructures and mechanical properties of AZ31 alloy processed by equal channel angular pressing (ECAP)
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Equal Channel Angular Pressing is being carried out to deform the AZ31 alloy at a processing temperature of 633K up to 4 passes for route Bc. In the present work, mechanical properties are enhanced by refining the grain size of AZ31 alloy at 633K for route Bc. The effect of microstructural changes in the AZ31 alloy has been studied resulting improvement of respective passes of mechanical properties illustrated in the present work. The average grain size of the as received material is obtained to be 31.8 μm and it is reduced to be 13.3 μm, 11 μm, 9 μm, and 7 μm after first, second, third and fourth pass respectively. Mechanical properties of AZ31 alloy improved prominently with increase in number ECAP passes at 633K. X-ray diffraction analysis was carried out to understand the phase changes in the AZ31 alloy for before and after ECAP processed specimen.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Muralidhar Avvari”
- BylineArticles whose byline prints “Narendranath S”
